Highlights:
Ivotion Dentures
11/18/26
By:
Jerry Ragle, CDT
Fast, Predictable Process

Years ago back in 2012, we brought to CU the Avident Digital Denture. It really wasn't "fully" digital because the bite and impression techniques were traditional, nonetheless a great finished product just workflows were less than ideal. Several dentists did get onboard at the time but found the impression technique very time consuming and slowly the technique dropped off. But, if done by the book, the technique was flawless, time-consuming yes, but extremely accurate, at that time.
Fast forward to early 2023 Ragle CAD entered the digital printed denture space. Most all had scanners so the reference denture was born. We started with Dentsply Lucitone print. Workflows worked, but in my opinion, materials did not match up to the hype. They are good, but not close to a set of Portrait teeth, waxed and then processed. If I am standing 3-4' away and talking to a patient, one may not be able to distinguish between the two, but as a clinician and technician we see what we do up-close, so yes there is a difference.
Today, 2026, scanners are better, and so are print resins, but printed dentures work better as an economy or embarrassment denture. I would not classify them as a premium denture.
So, what was it about the Avadent denture that made it really nice and the fits being superb? It was milled. Today, there is Ivotion, buy Ivoclar. We have been offering Ivotion dentures for over a year now but used an outside source to have them milled. I am now happy to announce Ragle has the Ivoclar Pure 7 mill which allows us to design and milled Ivotion in-house. I would say this is as close as one can get to a processed traditional denture but without the traditional workflows.
Workflows:
If a patient is currently wearing dentures this is by far the easiest way for your patient to receive new dentures. First, reline wash the current denture(s). Before taking those out, as with a fixed case, scan the bite. Remove the dentures and scan those as a reference dentures. Upload the files. The software brings in the now virtually articulated dentures. We outline the external border. The software creates the edentulous virtual model(s). We digitally set teeth and print a final as the try-in. If the try-in is good, we mill the final. If the try-in needs tweaked, bite, midline, smile line, etc., adjust or simply mark the denture and return. We make those corrections in the software and send out a new try-in. Once the try-in meets the patients’ expectations the final denture is milled and returned.
Keep in mind Ivotion dentures are milled out of a solid puck, teeth and base are one, therefore much stronger than a traditional denture where separate teeth are cured to the pink base. There is also no lifting of the palate as with a traditional denture and even a printed denture therefore no post-dam is needed.
If the case is for an immediate, this is even better. Scan the patient as you would a fixed case, upper and lower and a bite scan. Upload files. In the software we virtually remove the teeth and proceed with the virtual set-up. Could not be easier for the clinician.
So, what if the patient is edentulous and you need a bite rim? You can do one of three things. Take a traditional impression, or scan, and we will send a traditional bite rim, or use a UTS CAD registration device as pictured which eliminates the need for a bite rim. This is available as a loan item from RDL.
Whichever method you choose for the bite record is up to you. Once you have established the bite, with whatever method you choose to use, then the same workflows apply in producing the try-in denture and final. Pricing for Ivotion is very close to the same as a traditional set-up and premium finish denture with Portrait teeth.
Please call Jerry if you have any questions at 217-398-0090 or text the business text line using the same number. Looking forward to hearing from you!
Latest News